Heating, ventilating, and air conditioning - Faye C. McQuiston ,... - Librairie Eyrolles
Tous nos rayons

Déjà client ? Identifiez-vous

Mot de passe oublié ?

Nouveau client ?

CRÉER VOTRE COMPTE
Heating, ventilating, and air conditioning
Ajouter à une liste

Librairie Eyrolles - Paris 5e
Indisponible

Heating, ventilating, and air conditioning

Heating, ventilating, and air conditioning

Analysis and design

Faye C. McQuiston, Jerald D. Parker, Jeffrey D. Spitler

123 pages, parution le 01/06/2000 (5eme édition)

Résumé

The arts and science of heating, ventilating, refrigerating, and air conditioning have continued to develop since publication of the fourth edition of this text. These new developments and a general need to add new or delete old material has motivated this revision. The original objective of this text-to provide an up-to-date, convenient classroom teaching tool-remains unchanged, and literature published by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) is still the major source of material.

Dr. Jeffrey D. Spittler makes his debut in this edition as the third author; his two older colleagues welcome him and express their appreciation for his contributions to this work. Jeff has done a significant part of the revising of the new material on load calculation methods (Chapter 8) and energy calculations (Chapter 9). In addition his suggestions have resulted in several important changes in other chapters.

The text is intended for undergraduate and graduate engineering students who have completed basic courses in thermodynamics, heat transfer, fluid mechanics, and dynamics. Although the book is intended primarily for teaching, it may also be useful to practicing engineers as a reference. There is sufficient material for two-semester courses with latitude in course make-up.

A number of revisions have been based on suggestions from users of previous editions. Data and references have been updated throughout the text; however, in a few instances, useful material from older sources has been retained. Some new problems have been added, some deleted, and others revised. In all major areas problems are given for solution using a computer.

A major addition to the text is a package of computer programs, on CD, that cover psychrometrics, load calculations, piping design, duct design, and coil simulation. These programs are all Windows-friendly.

Chapter 2, Air-Conditioning Systems, has been revised to add material on boilers, ground-coupled systems, and thermal storage.

Chapter 8, The Cooling Load, has undergone a complete revision to reflect the latest load calculation methods and the demise of hand calculation methods.

Chapter 10, Flow, Pumps, and Piping Design, has new material relating to air elimination, and a section has been added on low-pressure steam system design.

Many other revisions have been made to clarify examples and discussion. Tabular material has been updated from the latest ASHRAE Handbook where needed.

Computers are commonplace in the modern education system, and instructors are encouraged to involve students in their use in system design. However, the authors also believe that students should first understand the basic principles and input required for a given program. The enclosed programs closely follow the theory given herein.

It appears that a complete conversion from English (IP) to the international (SI) system of units will not soon, if ever, occur in the United States. However, engineers should be comfortable with both systems of units when they enter practice. Therefore, this text continues to use them both, with emphasis placed on the English system. Instructors may blend the two systems as they choose.

Contents

  1. Introduction
  2. Air-Conditioning Systems
  3. Moist Air properties and Conditioning Processes
  4. Comfort and Health - Indoor Environmental Quality
  5. Heat Transmission in Building Structures
  6. Solar Radiations
  7. Space Heating Load
  8. The Cooling Load
  9. Energy Calculations
  10. Flow, Pumps, and Piping Design
  11. Space Air Diffusion
  12. Fans and Building Air Distribution
  13. Direct Contact Heat and Mass transfer
  14. Extended Surface Heat Exchangers
  15. Refrigeration
  16. Thermophysical Properties
  17. Weather Data
  18. Pipe and Tube Data
  19. Useful Data

L'auteur - Faye C. McQuiston

Faye C. McQuiston is professor emeritus of Mechanical and Aerospace Engineering at Oklahoma State University, Stillwater, Oklahoma. He received B.S. and M.S. degrees in mechanical engineering from Oklahoma State University in 1958 and 1959 and a Ph.D. in mechanical engineering from Purdue University in 1970. Dr. McQuiston is a registered professional engineer and a consultant to several system design and equipment manufacturing firms. He is active in research related to the design of heating and air-conditioning systems, particularly heat-exchanger design and simulation and load calculations. He has written extensively on heating and air conditioning and is the co-author of a basic fluid mechanics and heat transfer text.

L'auteur - Jerald D. Parker

Jerald D. Parker is a professor emeritus of mechanical engineering at Oklahoma Christian University after serving 33 years on the mechanical engineering faculty at Oklahoma State University. He received B.S. and M.S. degrees in mechanical engineering from Oklahoma State University in 1955 and 1958 and a Ph.D. in mechanical engineering from Purdue University in 1961. In ASHRAE he has served as chairman of the Technical Committee on Fluid Mechanics and Heat Transfer, chairman of a standards project committee, and a member of the Continuing Education Committee. He is a registered professional engineer.

L'auteur - Jeffrey D. Spitler

Jeffrey D. Spitler is a professor of mechanical and aerospace engineering at Oklahoma State University, Stillwater. He received B.S., M.S., and Ph.D. degrees in mechanical engineering at the University of Illinois, Urbana-Champaign, in 1983, 1984, and 1990. He joined the Oklahoma State University faculty in 1990. He is an active member of ASHRAE and has served on several technical committees, a standards committee, and the Student Activities Committee. He also serves on the board of directors of the International Building Performance Simulation Association. He is a registered professional engineer and has consulted on a number of different projects. He is actively involved in research related to design load calculations, ground source heat pump systems, and pavement heating systems.

Caractéristiques techniques

  PAPIER
Éditeur(s) Wiley
Auteur(s) Faye C. McQuiston, Jerald D. Parker, Jeffrey D. Spitler
Parution 01/06/2000
Édition  5eme édition
Nb. de pages 123
Format 18 x 26
Couverture Relié
Poids 1295g
Intérieur Noir et Blanc
EAN13 9780471350989

Avantages Eyrolles.com

Livraison à partir de 0,01 en France métropolitaine
Paiement en ligne SÉCURISÉ
Livraison dans le monde
Retour sous 15 jours
+ d'un million et demi de livres disponibles
satisfait ou remboursé
Satisfait ou remboursé
Paiement sécurisé
modes de paiement
Paiement à l'expédition
partout dans le monde
Livraison partout dans le monde
Service clients sav@commande.eyrolles.com
librairie française
Librairie française depuis 1925
Recevez nos newsletters
Vous serez régulièrement informé(e) de toutes nos actualités.
Inscription